I want to make dual boot Emteria OS and LibreELEC (and maybe Raspbian) on the same microSD card.

I'd appreciate some help if it's possible

I see from the 'package.json' created in the work directories for the Emteria installer that the installation method is 'fastboot', along with 'boot', 'oem', 'recovery' and 'system' partition images, but the Knowledge Base does not provide directions for how to use these, or the resulting SD Card. I am able to boot into your 'recovery.img' by putting the device into fastboot and running 'fastboot boot recovery.img' as expected, but before I run any potentially destructive commands on my device, I want to be fully sure what I am intended to do.

Written to /root/.intel/.civ/civ-1.ini
Starting up

goes to blank screen then just keeps rebooting over and over. any suggestions?

GMKtec n150 pc

After installation, the system booted normally at first but then went straight to a blank screen and has stayed that way. The SD card also shows a structure that looks a bit odd to me, not sure if that is typical, as this is my first time working with Emteria.

Any ideas on what might be causing this white background issue?

When I try to log in via device menu it inputs a license key for me. Which I validated is on my account. But when I click next I get the same error message.

Please help.

PS: The hardware is a raspberry pi 5

Any recommendations?

Tried both Windows and Ubuntu installers.
This is for RockPi5B

what do i do?

just installed android on a pi5 and reg all good....
any hd or usb stick i plug into the pi5 does not show up on android

cheers tinbin/craig

Hi all

I tried to install emteria android 13 and 14 on my pi 4b and I get stuck in this endless 2 second boot loop as seen in the picture. I am a complete noob and I have been making no progress on fixing this. Anyone know command's to get out of the boot or any solutions. I am using the pi 32gb micro sd card and then i tried it on a samsung 128gb same issue. is it possible that the pi4b is damaged im not sure anymore.

Any advice would be most welcome

I am evaluating Emteria with 2 hardware. A roc5b (and I tried too with a Raspberry Pi4B). Both have 2 hdmi outputs and they are both enabled in mirroring mode (displaying the same).

Is it possible to setup emteria in a way I can have different apps on each output (Extended desktop)?

+03:41 (, 0) Starting step 1 : Verifying files
+03:41 (, 0) "super.zip" failed MD5 verification
+03:41 (, 0) Expected "3d74e016a9351724ad7ffc3f86d82ad2" , but computed "0bac1bfb9dfb902e52887fe7cf868740"

Installer ends here

But if I tried to flash a Raspberry Pi 4 Model B the SD card is detected no problem.

Any idea why?

Card did not respond to voltage select! : -110
Couldn't find partition mmc 0:1
Can't set block device
U-boot>

I'm guessing the boot is set to only SDcard. Any other options?

PS Also I'm getting errors and issues with your user login password reset, and logging into Forum/Website Dashboard, had to create new user could get reset, some error on token for cookies I'm going to have to try another browser. Still testing, anybody else?

I'm using installer version v1.1-43

Card did not respond to voltage select! : -110
Couldn't find partition mmc 0:1
Can't set block device
U-Boot>

https://pastebin.com/63uEPKn1

thanks in advance for any suggestions
Pete

TY
rgarella@gmail.com

After some time, I've found out that the installer is ignoring my external drive (micro SD Card).
Here is the output of the Emteria Installer:

Refreshing drives
Ignoring system drive "Samsung MZVLB1T0HALR-000L2"
Ignoring external drive "Generic MassStorageClass USB Device"
Ignoring system drive "ST1000LM049-2GH172"
Found 0 drive(s)

I'm using the Sandisk 256GB micro SD Card with using the "exFat" format.
and using the Emteria Installer v1.1-37.

Can someone help me with this issue? Is it something wrong with my computer or what? Or I need to change or install something on my computer to make it works?

Using email info responds with "error contacting server request was invalid"

This problem only started recently and I've tried re-installing with the original 1.0 and latest 760 version. I've entered one of my 2 codes and one responds with "Server returned no license data. Please contact support"

My Rpi 3 Emteria instance (v7.6.22) has suddenly (at the weekend) stopped being activated. And the code I see on the website just says "No suitable code for this device" when entered into this device.

Anything known about this or who I can contact about this with screenshots?

Thanks

Any advice about how to resolve?

Thanks

Where do I go from here?

PLEASE HELP!

usst2@raspberrypi:~/Downloads $ ls
Emteria.OS_Installer-v1.1-43.AppImage
usst2@raspberrypi:~/Downloads $ chmod a+x Emteria.OS_Installer-v1.1-43.AppImage
usst2@raspberrypi:~/Downloads $ sudo ./Emteria.OS_Installer-v1.1-43.AppImage
./Emteria.OS_Installer-v1.1-43.AppImage: 1: Syntax error: ")" unexpected

          "  Net:  No ethernet found.
             boot in 1 seconds, enter 'no' to stopswitch to partion#0,OK
             mmc0 is current device
             Scanning mmc 0:1...
             Found U-Boot script /boot.scr.uimg
             991 bytes read in 1 ms(967.8 KiB/s)
             ## Executing script at 02400000
             The address of the fdt is invalid (NULL)
             No FDT memory address is configured. Please configure
             the FDT address via " fdt addr <address>" command.       ## ( "  HOW " ??????) ##
             Aborting!
             ** Unrecognised filesystem type **
             ## Warning: defaulting to text format
             ## Info: input data size =181 =0xB5
             2368094 bytes read in 102 ms (22.1 MiB/s)
             9454432 bytes read in 405 ms (22.3MiB/s)
             Kernel image @ 0x080000 [ 0x000000 _ ox904360 ]
             ## Loading init Ramdisk from Legacy Image at 02700000...
             Image Name:
             Image Type: ARM Linux Ramdisk Image ( gzip compressed)
             Data Size :       2368030 Bytes = 2.3 MiB
             Load Address : 00000000
             Entry Point :     00000000
             Verifying Checksum ... OK
             Starting Kernel ...

                                             "        and that's IT ????????  

  can you please advise me on how to set this up 

                                                                with thanks.... C. :s 

I have also tried the various versions (Live, Nightly, Beta) offered from the installer with the same results. I have enclosed a picture to provide some of the items listed. Again this sequence runs and never goes to the GUI screen. I have previous installed Emeria on 3 different Raspberry Pi 3 models, so I am aware of the process and what is supposed to happen

+00:55 (, 0) Using zip file at "/home/zen/.local/share/Emteria/Installer/rpi3-v0.5.3/system.zip"
+02:53 (, 0) Failed writeRaw: 5

i used it successfully for 0.5.2, a week ago so I'm quite surprised ?

(I'm doing this because the system update fails during download as others have already mentionned)

Cheers

Is there a possibility to give the installer the proxy User?

Problem is, with 16Gb cards, over time that can take up quit a large abount of space. As with other Raspberry Pi images, I've used a program called PiShrink to reduce the file size and tried it on one of my images. It seem to do the shrinking okay but when I put the image onto a 16gb card and attempted to start the Pi, the green light kept flashing 4 time and system wouldn't boot.

I tried another shrinking and what I have noticed is that at the very start of the process, it refers to '/etc not found so autoexpand will not be enabled'

Any suggestions

Thanks

Declan

00:00 (, 0) Starting emteria installer v1.1-43-g68add26
+00:00 (, 0) Detected SSL support: true

• runtime version: "OpenSSL 1.1.1g 21 Apr 2020"
• build version: "OpenSSL 1.1.1g 21 Apr 2020"
  +00:06 (, 0) Opening remote connection
  +00:07 (, 0) Using PackageData version: 0
  +00:10 (, 0) Using PackageData version: 1
  +00:11 (, 0) Refreshing drives
  +00:11 (, 0) Ignoring system drive "Sabrent Rocket 4.0 1TB"
  +00:11 (, 0) Ignoring system drive "Samsung SSD 970 EVO Plus 250GB"
  +00:11 (, 0) Found 1 drive(s)
  +00:15 (, 0) Checking for OEM config
  +00:16 (, 0) No OEM config available
  +00:16 (, 0) Started downloading "package.json"
  +00:16 (, 0) Using path "C:/Users/jcmyn/AppData/Local/Emteria/Emteria.OS Installer/rpi4-v11.3.0/package.json"
  +00:16 (, 0) Finished downloading "package.json"
  +00:16 (, 0) Using PackageData version: 1
  +00:16 (, 0) Already downloaded correct "boot.zip"
  +00:20 (, 0) Already downloaded correct "system.zip"
  +00:20 (, 0) Already downloaded correct "vendor.zip"
  +00:20 (, 0) Already downloaded correct "oem.zip"
  +00:20 (, 0) Already downloaded correct "odm.zip"
  +00:20 (, 0) Already downloaded correct "misc.zip"
  +00:20 (, 0) Already downloaded correct "cache.zip"
  +00:20 (, 0) Already downloaded correct "userdata-2147483648.zip"
  +00:20 (, 0) Already downloaded correct "userdata-4294967296.zip"
  +00:20 (, 0) Already downloaded correct "userdata-8589934592.zip"
  +00:20 (, 0) Finished DownloadWorker
  +00:20 (, 0) Using PackageData version: 1
  +00:20 (, 0) Flashing on raw "\\.\PHYSICALDRIVE3"
  +00:20 (, 0) Initializing package base at "C:/Users/jcmyn/AppData/Local/Emteria/Emteria.OS Installer\rpi4-v11.3.0"
  +00:20 (, 0) Drive: "SANDISK SDDR-489 USB Device" with 15833497600 bytes
  +00:20 (, 0) Raw at "\\.\PHYSICALDRIVE3"
  +00:20 (, 0) Mounted at "E:"
  +00:20 (, 0) Starting step 0 : Reading package
  +00:20 (, 0) Using PackageData version: 1
  +00:20 (, 0) Finished step 0 : Reading package
  +00:20 (, 0) Starting step 1 : Verifying files
  +00:21 (, 0) Finished step 1 : Verifying files
  +00:21 (, 0) Starting step 2 : Preparing
  +00:22 (, 0) Diskpart output: "\r\nMicrosoft DiskPart version 10.0.19041.964\r\n\r\nCopyright (C) Microsoft Corporation.\r\nOn computer: DESKTOP-MMJAALV\r\n\r\nDisk 3 is now the selected disk.\r\n\r\nVirtual Disk Service error:\r\nThe operation is not supported on removable media.\r\n\r\n"
  +00:25 (, 0) Failed to remove drive "E:"
  +00:25 (, 0) Failed to prepare drive. Try reconnecting drive.

Any help appreciated..

+00:00 (, 0) Starting emteria installer v0.6-16-gc6254ca
+00:00 (, 0) Detected SSL support: true
- runtime version: "OpenSSL 1.0.2q 20 Nov 2018"
- build version: "OpenSSL 1.0.2j 26 Sep 2016"
+00:14 (, 0) Opening remote connection
+00:19 (, 0) Refreshing drives
+00:20 (, 0) Ignoring system drive "SanDisk SD6SP1M128G1012"
+00:20 (, 0) Found 2 drive(s)
+00:24 (, 0) Checking for OEM config
+00:26 (, 0) No OEM config available
+00:26 (, 0) Started downloading "package.json"
+00:26 (, 0) Using path "C:/Users/Main/AppData/Local/Emteria/Emteria.OS Installer/rpi3-v0.7.0/package.json"
+00:26 (, 0) Finished downloading "package.json"
+00:26 (, 0) Already downloaded correct "boot.zip"
+00:26 (, 0) Already downloaded correct "oem.zip"
+00:27 (, 0) Already downloaded correct "system.zip"
+00:27 (, 0) Finished DownloadWorker
+00:27 (, 0) Flashing on raw "\\\\.\\PHYSICALDRIVE2"
+00:27 (, 0) Initializing package base at "C:/Users/Main/AppData/Local/Emteria/Emteria.OS Installer\rpi3-v0.7.0"
+00:27 (, 0) Drive: "Generic Mass-Storage USB Device" with 32036093952 bytes
+00:27 (, 0) Raw at "\\\\.\\PHYSICALDRIVE2"
+00:27 (, 0) Mounted at "E:"
+00:27 (, 0) Starting step 0 : Reading package
+00:27 (, 0) Finished step 0 : Reading package
+00:27 (, 0) Starting step 1 : Verifying files
+00:29 (, 0) Finished step 1 : Verifying files
+00:29 (, 0) Starting step 2 : Preparing
+00:31 (, 0) Diskpart output: "\r\nMicrosoft DiskPart version 10.0.17134.1\r\n\r\nCopyright (C) Microsoft Corporation.\r\nOn computer: DESKTOP-CGMDAUU\r\n\r\nDisk 2 is now the selected disk.\r\n\r\nVolume 6 is the selected volume.\r\n\r\nDiskPart successfully removed the drive letter or mount point.\r\n\r\nPlease wait while DiskPart scans your configuration...\r\n\r\nDiskPart has finished scanning your configuration.\r\n"
+00:38 (, 0) Diskpart output: "\r\nMicrosoft DiskPart version 10.0.17134.1\r\n\r\nCopyright (C) Microsoft Corporation.\r\nOn computer: DESKTOP-CGMDAUU\r\n\r\nDisk 2 is now the selected disk.\r\n\r\nDiskPart succeeded in cleaning the disk.\r\n\r\nPlease wait while DiskPart scans your configuration...\r\n\r\nDiskPart has finished scanning your configuration.\r\n"
+00:41 (, 0) Finished step 2 : Preparing
+00:41 (, 0) Starting step 3 : Opening to write
+00:41 (, 0) Finished step 3 : Opening to write
+00:41 (, 0) This drive seems to have 62570496 sectors
+00:41 (, 0) Found 4 partitions to write
+00:41 (, 0) Processing partition "boot" using LBA of 2048
+00:41 (, 0) Size determined from zip: 65011712
+00:41 (, 0) Partition will occupy 126976 sectors
+00:41 (, 0) Processing partition "system" using LBA of 129024
+00:41 (, 0) Size determined from zip: 2147483648
+00:41 (, 0) Partition will occupy 4194304 sectors
+00:41 (, 0) Processing partition "oem" using LBA of 4323328
+00:41 (, 0) Size determined from zip: 536870912
+00:41 (, 0) Partition will occupy 1048576 sectors
+00:41 (, 0) Processing partition "userdata" using LBA of 5371904
+00:41 (, 0) Processing dynamically sized partition "userdata"
+00:41 (, 0) Partition will start at LBA 5371904
+00:41 (, 0) Remaining sectors on drive: 57198592
+00:41 (, 0) Starting step 4 : Writing MBR
+00:41 (, 0) Partitions in MBR:
+00:41 (, 0) Partition 0 bootable true LBA 2048 size 126976
+00:41 (, 0) Partition 1 bootable false LBA 129024 size 4194304
+00:41 (, 0) Partition 2 bootable false LBA 4323328 size 1048576
+00:41 (, 0) Partition 3 bootable false LBA 5371904 size 57198592
+00:41 (, 0) Finished step 4 : Writing MBR
+00:41 (, 0) Starting step 5 : Writing file
+00:41 (, 0) Using zip file "C:/Users/Main/AppData/Local/Emteria/Emteria.OS Installer/rpi3-v0.7.0/boot.zip"
+00:48 (, 0) Finished step 5 : Writing file
+00:48 (, 0) Starting step 5 : Writing file
+00:48 (, 0) Using zip file "C:/Users/Main/AppData/Local/Emteria/Emteria.OS Installer/rpi3-v0.7.0/system.zip"
+03:59 (, 0) Finished step 5 : Writing file
+03:59 (, 0) Starting step 5 : Writing file
+03:59 (, 0) Using zip file "C:/Users/Main/AppData/Local/Emteria/Emteria.OS Installer/rpi3-v0.7.0/oem.zip"
+04:45 (, 0) Finished step 5 : Writing file
+04:45 (, 0) Starting step 6 : Creating file system
+04:45 (, 0) Creating new ext4 filesystem: ideal size is 57198592 , closest match is 55349760
+04:48 (, 0) Failed writeRaw: 0
+04:48 (, 0) Tried to write 4096 bytes
+04:48 (, 0) Failed creating ext4 filesystem
+04:48 (, 0) Failed writing partition content for "userdata"

krisztian@titania:~$ cd Downloads/
krisztian@titania:~/Downloads$ sudo ./Emteria.OS_Installer-v1.1-32.AppImage
[sudo] password for krisztian:
Starting emteria installer v1.1-32-g865cc34
Detected SSL support: true
- runtime version: "OpenSSL 1.1.1g 21 Apr 2020"
- build version: "OpenSSL 1.1.1g 21 Apr 2020"
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
Segmentation fault

Any ideas?

Now I have these files downloaded:

• boot.zip
• oem.zp
• system.zip
• package.json

The 3 ZIP files each contain one IMG file and the package.json file seems to contain information about the partitions these images should be written to.

What can I do now to install the OS having these 4 files?

In my installer, I cannot find the option to install on raspberry 4.

Is there any special way for installation?

Regards,

+00:00 (, 0) Starting emteria installer v0.5-9-g29c7cde
+00:01 (qrc:/main.qml, 221) qrc:/main.qml:221:17: QML Rectangle: Binding loop detected for property "height"
+00:23 (, 0) Refreshing drives
+00:23 (, 0) Ignoring system drive "ST500LM021-1KJ152"
+00:23 (, 0) Found 1 drives
+00:44 (, 0) Downloading "package.json"
+00:44 (, 0) Using path "C:/Users/InathiS/AppData/Local/Emteria/Emteria.OS Installer/rpi3-v0.6.0/package.json"
+00:45 (, 0) Finished download of "package.json"
+00:45 (, 0) Checking for OEM config...
+00:46 (, 0) Already downloaded correct "boot.zip"
+00:46 (, 0) Already downloaded correct "oem.zip"
+00:46 (, 0) Already downloaded correct "system.zip"
+00:46 (, 0) Finished DownloadWorker
+00:46 (, 0) Flashing on raw "\\\\.\\PHYSICALDRIVE1"
+00:46 (, 0) Initializing PackageWriter
+00:46 (, 0) Package base path: "C:/Users/InathiS/AppData/Local/Emteria/Emteria.OS Installer/rpi3-v0.6.0"
+00:46 (, 0) Drive: "SDHC Card" with 15931539456 bytes
+00:46 (, 0) Raw at "\\\\.\\PHYSICALDRIVE1"
+00:46 (, 0) PackageWriter initialized successfully
+00:46 (, 0) Starting step 0 Reading package
+00:46 (, 0) Finished step 0 Reading package
+00:46 (, 0) Starting step 1 Verifying files
+00:47 (, 0) Finished step 1 Verifying files
+00:47 (, 0) Starting step 2 Preparing
+00:50 (, 0) Diskpart output: "\r\nMicrosoft DiskPart version 10.0.17134.1\r\n\r\nCopyright (C) Microsoft Corporation.\r\nOn computer: CONTROLS-NATHI\r\n\r\nDisk 1 is now the selected disk.\r\n\r\nDiskPart succeeded in cleaning the disk.\r\n\r\nPlease wait while DiskPart scans your configuration...\r\n\r\nDiskPart has finished scanning your configuration.\r\n"
+00:50 (, 0) Diskpart error: ""
+00:52 (, 0) Finished step 2 Preparing
+00:52 (, 0) Starting step 3 Opening to write
+00:52 (, 0) Finished step 3 Opening to write
+00:52 (, 0) Assuming drive has 31116288 sectors
+00:52 (, 0) Processing 4 partitions
+00:52 (, 0) Processing partition "boot"
+00:52 (, 0) Using LBA of 2048
+00:52 (, 0) Size determined from zip source: 65011712
+00:52 (, 0) Partition will occupy 126976 sectors
+00:52 (, 0) Processing partition "system"
+00:52 (, 0) Using LBA of 129024
+00:52 (, 0) Size determined from zip source: 2147483648
+00:52 (, 0) Partition will occupy 4194304 sectors
+00:52 (, 0) Processing partition "oem"
+00:52 (, 0) Using LBA of 4323328
+00:52 (, 0) Size determined from zip source: 536870912
+00:52 (, 0) Partition will occupy 1048576 sectors
+00:52 (, 0) Processing partition "userdata"
+00:52 (, 0) Using LBA of 5371904
+00:52 (, 0) Processing dynamically sized partition "userdata"
+00:52 (, 0) Partition will start at LBA 5371904
+00:52 (, 0) Remaining sectors on drive: 25744384
+00:52 (, 0) Starting step 4 Writing MBR
+00:52 (, 0) Partitions in MBR:
+00:52 (, 0) Partition 0 bootable true LBA 2048 size 126976
+00:52 (, 0) Partition 1 bootable false LBA 129024 size 4194304
+00:52 (, 0) Partition 2 bootable false LBA 4323328 size 1048576
+00:52 (, 0) Partition 3 bootable false LBA 5371904 size 25744384
+00:52 (, 0) Finished step 4 Writing MBR
+00:52 (, 0) Starting step 5 Writing file
+00:52 (, 0) Using zip file at "C:/Users/InathiS/AppData/Local/Emteria/Emteria.OS Installer/rpi3-v0.6.0/boot.zip"
+00:56 (, 0) Finished step 5 Writing file
+00:56 (, 0) Starting step 5 Writing file
+00:56 (, 0) Using zip file at "C:/Users/InathiS/AppData/Local/Emteria/Emteria.OS Installer/rpi3-v0.6.0/system.zip"
+03:30 (, 0) Finished step 5 Writing file
+03:30 (, 0) Starting step 5 Writing file
+03:30 (, 0) Using zip file at "C:/Users/InathiS/AppData/Local/Emteria/Emteria.OS Installer/rpi3-v0.6.0/oem.zip"
+04:08 (, 0) Finished step 5 Writing file
+04:08 (, 0) Starting step 6 Creating file system
+04:08 (, 0) Creating ext4 filesystem from scratch, ideal size is 25744384
+04:08 (, 0) Closest script size is 24099840
+04:08 (, 0) Failed writeRaw: 0
+04:08 (, 0) Tried to write 3072 bytes
+04:08 (, 0) Failed creating ext4 filesystem
+04:08 (, 0) Failed writing partition content for "userdata"

I find no good ways to get beyond this point, setting up a "group" in the empteria webpage where its for testing as a system for my boat(private boat) in order to utilize a 23 inch touch screen.

When one sets up obstacles for people even testing your software, its not a very good sign, as it looks so desperate and so far away from the open source philosophy that is the reason one can make this software.

So for me to be using time to make a FORUM POST in order to TEST the product as a private person, seems ridiculous in 2020.

Why not make it clear and obvious what to do to test in and not waste peoples time on inviting for testing and then make it a cluster fuck ones your up and going?

I came to the point where i am to fill in my email and password and that states No license and there it stops.

Now please, lets spend some time to walk me through the complex procedure to just see this working at no cost, no credit card and no bullshit.

ive tryed making my own partitions, and unformatted and letting the emteriaflash.exe file do the partitions aswell. any1 got any idea why boot fails? but the rest doesnt . ive srched other threads for identical problem but havent found.