I would like to start FrontFace in full-screen mode. The kiosk mode and everything else are working so far. However, there is still a white bar at the bottom where the apps are normally displayed. These are not visible in kiosk mode, but the display is still not in full-screen. Does anyone have an idea what settings I need to change to make it work?

I assume that I am gonna be told something like "there's nothing we can do about that". But i would still want to ask, can I get this device to be activated in my new account?. Because I don't think that it is actually "impossible".

By the way, back when I supposedly activated that device, the system worked so badly that I got disappointed and decided to just send my account to oblivion, probably without even deleting my account.
As far as I can remember, I wasn't even able to connect to the internet because the system was buggy AF. So, I wonder how I was even able to activate it that time.

Please, say you can actually help me with this seriously annoying issue.

I only want to use my Raspberry Pi as a regular android device because android images for the RPi are practically non existent, and now that Emteria's system seems to be more usable and stable than it was like four years ago or so, I actually feel like I would actually be able to use it and enjoy it now.

By the way, I don't want to make anyone mad at me, but why are Emeteria's website and (at least previously) Android system so buggy and annoying to interact with?.

I hope someone can help me with this, even when the info I found about my problem says my problem "can't" be solved.

Is there something wrong with the activation server currently?

I would l8ke to use one of my rpi 4s as a spotify player but mainly to play saved spotify playlists locally downloaded on a stroage device or the sd card. I am in australia in a remote area using satellite internet. The link has a a very high latency and gets overwhelmed in the evenings, so the live streaming aint no good with spotify but playing saved playlists locally is great. I want to free up my andoid tablets / notebooks / phone and use one of my rpi 4s instead. Tried moode and other linux distros with spotify connects but they buffer badly at some point. I have a great pa system (hk audio) playing thru a topping ex5 dac but the streaming unless I dedicate a android device lets me down. I was hoping a emteria os on pi4 would work? Thought I would download the spotify apk and install it or maybe via fdroid. I have tried other pi linux ops but the latency kills em. Android seems to work well as long as the spotify playlists are saved locally. I dont really have a workable windows pc (15 years old). Web version of spotify on linux to slow. Also headless would be best.

Any ideas?

I do not want to move away from Android, because the framework for building touch interfaces is so intuitive, and porting it now would also be a huge pain (if I were to go for QT on embedded Linux or something).

I've stumbled on Emteria today in my quest for making a standalone android system for my ancient Renault Clio MK3.
I've given OpenAuto Pro a whirl and really like it, although I want to be able to use the unit without having to tether my phone.

My plan is to Use a Pi 4 with the official 7" touchscreen and mount some HATs to provide some of the features required to use this device in my car such as:
HAT - GPS
HAT - Audio out
USB - Mic
USB - mobile data via sim card

My uses would need to include
Spotify, YouTube and other media apps
Local Music
Calls
Google Maps/ map alternative
'OK Google' voice control

Has anyone tried something similar?

Thanks

Craig

I've bought the Raspberry Pi 4. I would like to install Android Emteria on there. But before do to it,I would like to know if I can watch Netflix or any other pay per view web site content,like I can do using the Android installed on my phone. In short terms,will Widevine work correctly ? thanks.

I can install the app, but when I click sign in, I get "Internal Error. Please try again." Can anyone help me (and my son) to get this up and running? Thanks

I've bought the Raspberry Pi 4. I would like to install Android Emteria on there. But before do to it,I would like to know if I can watch Netflix or any other pay per view web site content,like I can do using the Android installed on my phone. In short terms,will Widevine work correctly ? thanks.

I would like to know if anyone of you has tried already to emulate Emteria.OS (11.2.0) for Raspberry Pi 4B or an older version with qemu-kvm on the Linux / Ubuntu PC or on a arm64 board. I have the jetson nano and I really would like to boot and run Android 11 there inside a qemu window and accelerated with kvm with the virgl graphic acceleration enabled.

Is there a way to actually disable the status bar and navigation bar in kiosk mode?
(or provide a work around within an custom app)

I already disabled the back and home buttons in the kiosk mode settings, and both bars are already hidden by default.
But as soon as I swipe from the top down or from the bottom up both bars appear again for a short while.
And when I swipe a few times with a few second both bars don't even hide again!

I have an application which is ran in full screen as autostart in kiosk mode.
But each time the status or navigation bar is visible the touch area underneath them is not usable.

I tried this with a pi3 and a pi5. Once I setup the secondary NIC, I lose DNS resolution. I'm expecting that once I restore access to the 192.168.0.0/24 network that I would be able to reach the defined dns server (192.168.0.153), but this is not happening over either NIC.

(short version: I ran tcpdump on each NIC from external devices to watch what was happening with the traffic - once I got the second nic working, DNS stops working.)

I plug in a USB3 gigabit NIC to get eth1, where the built in nic is eth0. eth0 is DHCP:

This is how I setup the second nic by hand for now:

get an adb shell

adb shell

get root

sushell

I then give the gigabit nic an ip, using this trick of having to set it twice for it to take for some reason (this is true regardless of which method be it ifconfig, ip, or ndc):

for x in 1 2;do ndc interface setcfg eth1 192.168.2.1 24;sleep .2;done

show that the address took on eth1:

ip a s eth1

at this point I would expect to be able to ping things on the 192.168.2.0/24 network, but that is not functional.

this is what I am doing to get around that:

create a new network

ndc network create oem1
ndc network interface add oem1 eth1

eth1 table variant:

looking at "ip route show table 0", it will show eth0 has a table eth0, but not eth1.

so make the eth1 table:

ip route add 192.168.2.0/24 table eth1 dev eth1 proto static scope link

add the performance networks route - it must be on the eth1 table:

ip route add 198.18.0.0/15 via 192.168.2.10 table eth1 dev eth1

since we're using the eth1 table, add the eth0 routes

ip route add 192.168.0.0/24 table eth1 dev eth0
ip route add default via 192.168.0.1 table eth1

set the default network domain to 1 (normally 0), which will let android intiate over eth1:

ndc network default set oem1

make a static arp for the server

may have to ping first to do this (otherwise will get RNETLINK answers: No such file or directory)

ip neighbor change 192.168.2.10 lladdr 6e:2a:21:ab:cd:ef dev eth1

now the server can be pinged quickly

ping 192.168.2.10

but dns wont work - this will fail to resolve to an IP, but does work before I mangle the networking:

ping www.cisco.com

things I've tried:

originally the network was named eth1, I switched to calling it oem1 after digging through android source a bit and finding the special oemX network handling. Didn't seem to matter for this though.

I tried setting STATIC ip on eth0, where I could in theory change DNS, but for some reason emteria's app wont set static on the pi5

I tried lineageOS and it does nearly the same thing, except of course how it handles the static IP config on ethernet (wherein it just doesn't allow that, which is annoying.)

#include <Debug.h>
#include <DEV_Config.h>
#include <sensirion_arch_config.h>
#include <sensirion_voc_algorithm.h>
#include <SGP40.h>

#include "DEV_Config.h" // libary for VOC sensor
#include "SGP40.h"      // libary for VOC sensor 

UBYTE voc = 0;

void setup() {
  if (SGP40_Init() != 0) {
    Serial.print("init err!!!"); // if theres an error in the VOC sensor return this

  }

  Serial.begin(9600);                // Initialize serial communication
}

void loop() {

  voc = SGP40_MeasureVOC(25, 50); // VOC sensor MeasureR aw(25, 50);
  Serial.print("voc = ");         // prints voc = to serial
  Serial.println(voc);            // prints raw voc level

}

My set-up:
Raspberry Pi 3 B running Dietpi v8.25.1, configured LAN with static IP 10.0.0.2 255.255.255.0
Raspberry Pi 4 B running Emteria v13.4.0, configured LAN with static IP 10.0.0.1 255.255.255.0
Connected to each-other directly with an ethernetcable (no router/switch etc. inbetween)
Both connected to the same WiFi network as well (both with DHCP 192.168.1.x)

I'm trying to stream UDP data from Emteria to Dietpi over the LAN connection between the devices (So I am not depending on the WiFi).

Initially I was only able to ping from DietPi to Emteria but not the other way around.
I've added an IP route/rule to fix this:
ip route add 10.0.0.2/32 dev eth0
ip rule add to 10.0.0.2 lookup eth0

IP route gives:
10.0.0.0/24 dev eth0 proto kernel scope link src 10.0.0.1
192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.208

IP route get 10.0.0.2 gives:
10.0.0.2 dev eth0 table eth0 src 10.0.0.1 uid 0 cache

IP rule list gives:
0: from all lookup local
9999: from all to 10.0.0.2 lookup eth0
10000: from all fwmark 0xc0000/0xd0000 lookup legacy_system
11000: from all iif lo oif dummy0 uidrange 0-0 lookup dummy0
11000: from all iif lo oif wlan0 uidrange 0-0 lookup wlan0
11000: from all iif lo oif eth0 uidrange 0-0 lookup eth0
16000: from all fwmark 0x10063/0x1ffff iif lo lookup local_network
16000: from all fwmark 0x10067/0x1ffff iif lo lookup wlan0
16000: from all fwmark 0x10c4f/0x1ffff iif lo lookup eth0
17000: from all iif lo oif dummy0 lookup dummy0
17000: from all iif lo oif wlan0 lookup wlan0
17000: from all iif lo oif eth0 lookup eth0
18000: from all fwmark 0x0/0x10000 lookup legacy_system
19000: from all fwmark 0x0/0x10000 lookup legacy_network
20000: from all fwmark 0x0/0x10000 lookup local_network
23000: from all fwmark 0x67/0x1ffff iif lo lookup wlan0
23000: from all fwmark 0xc4f/0x1ffff iif lo lookup eth0
31000: from all fwmark 0x0/0xffff iif lo lookup wlan0
32000: from all unreachable

Both ping tests back and forth are now fine, both with a stable <1ms time
But unfortunately the UDP stream of data is still not stable.

Also tested successfully:

• Disable WiFi on Emteria (which seems to force the stream over eth0 and then works fine?)
• Emteria stream to Dietpi over WiFi instead of LAN
• Windows laptop stream over WiFi to DietPi
• Windows laptop stream over LAN to DietPi (also configured with static IP 10.0.0.1, plugged ethernet from Emteria into laptop)

To be more specific on the UDP datastream:
This is a Godot "Game" to running on Emteria and also streaming the screen data to DietPi.
But the screen on the DietPi is very laggy.
The Godot code uses the PacketPeerUDP() with set_dest_address(IP_SERVER, PORT_SERVER) and put_packet(buffer) to set up the UDP stream.

I have configured the Android OS for using of ADB,

the decive is recogniced by adb

List of devices attached
192.168.195.50:5555 device product:CPH1907 model:CPH1907 device:OP4B83L1 transport_id:15
192.168.195.68:5555 device product:rpi4 model:Raspberry_Pi_4 device:rpi4 transport_id:16

and successfully connected

already connected to 192.168.195.68:5555

but when i start scrcpy.exe I got the following error messages:
(SCRCPY works well with my smartphone)

C:\Users\Admin>C:\Install\scrcpy\scrcpy-win64-v2.3.1\scrcpy-win64-v2.3.1\scrcpy.exe -s 192.168.195.68:5555
scrcpy 2.3.1 https://github.com/Genymobile/scrcpy
INFO: ADB device found:
INFO: (tcpip) 192.168.195.50:5555 device CPH1907
INFO: --> (tcpip) 192.168.195.68:5555 device Raspberry_Pi_4
C:\Install\scrcpy\scrcpy-win64-v2.3.1\scrcpy-win64-v2.3.1... file pushed, 0 skipped. 52.0 MB/s (66007 bytes in 0.001s)
[server] INFO: Device: [brcm] emteria Raspberry Pi 4 (Android 13)
INFO: Renderer: direct3d
INFO: Texture: 1920x1080
[server] ERROR: Encoding error: java.lang.IllegalStateException: null
[server] INFO: Retrying with -m1600...
[server] INFO: Retrying...
[server] ERROR: Encoding error: java.lang.IllegalStateException: null
[server] INFO: Retrying with -m1280...
[server] INFO: Retrying...
[server] ERROR: Encoding error: java.lang.IllegalStateException: null
[server] INFO: Retrying with -m1024...
[server] INFO: Retrying...
[server] ERROR: Encoding error: java.lang.IllegalStateException: null
[server] INFO: Retrying with -m800...
[server] INFO: Retrying...
[server] ERROR: Encoding error: java.lang.IllegalStateException: null
WARN: De[server] ERROR: Exception on thread Thread[video,5,main]
java.lang.IllegalStateException
at android.media.MediaCodec.native_dequeueOutputBuffer(Native Method)
at android.media.MediaCodec.dequeueOutputBuffer(MediaCodec.java:3572)
v at com.genymobile.scrcpy.SurfaceEncoder.encode(SurfaceEncoder.java:157)ice
d at com.genymobile.scrcpy.SurfaceEncoder.streamScreen(SurfaceEncoder.java:76)
i at com.genymobile.scrcpy.SurfaceEncoder.lambda$start$0$com-genymobile-scrcpy-SurfaceEncoder(SurfaceEncoder.java:253)
at com.genymobile.scrcpy.SurfaceEncoder$$ExternalSyntheticLambda0.run(Unknown Source:4)
at java.lang.Thread.run(Thread.java:1012)
sconnected

any help is appreciated

Thanks !

BennyLin

HELP ME !!!

I use ADB to pull from cell phone a working apk to adb install on Android rPi 400.

I would like to build an "onboard computer" to be installed in a vehicle. I want to use the existing touch screen connected to a Raspberry Pi. The Raspberry pi is powered with a UPS to ensure safe shutdowns when the power is turned off. The UPS-Hat i'm using is communicating over the built in serial port and a python script.

I have managed so far to:

• Install Termux
• Install Python, Python-PIP and Pyserial
• Configured Enable UART in config.txt

When i'm executing the script i get "Permission Denied" [Errno 13]/dev/ttyAMA0. I have seen the documentation regarding using the SuShell app but i do not understand how to set it up or forward the Termux request to SuShell. Any advice?

The wifi in the area we want to install a display board is spotty, so we'd like to add an LTE hat to an RPi4.

I know how to install google play via adb, but how do I add support for the LTE hat?

WBR
Janex

I am using Raspberry Pi 4 with the official Raspberry 7 inch touchscreen in combination with the Carlin Autokit.apk

All seem to work well, but I am getting a split in screen resolution with the bottom half of the screen with a green haze. I have tried different USB cables and same result. I also know it works on a different Android build (KonstaKANG)

Any suggestions as to what I might be doing wrong !

I would like to share something: If you are looking for a power button for your Emteria.OS-based project you might be interested in the PowerBlock. I have finished the work on the Emteria.OS service to make it work with this great Android OS distribution and the Raspberry Pi: https://blog.petrockblock.com/2019/09/19/power-button-emteria/.

Cheers!

you need :
- usb stick format fat32

first :

download gapps here : http://opengapps.org/
i used ARM 7.1 Pico. its the smalest version of gapps, it only install play store.
Put the .zip file you just download on your usb stick.

second :
start the Pi3 with Emteria.OS, when it's start plug your usb.
open the usb via the upper side of you screen.
press a long time on the gapps.zip file and copy past to Download folder.
eject your usb.

third :
Use the Shutdown preinstalled app and go to RECOVERY.
in the recovery menu , use "install" an go to the download folder. select your gapps.zip file.
and clic on install from zip.
select reboot after install.
wait and

enjoy play store

I have:
- Installed and booted Emteria
- Enabled Developer Options
- Enabled Allow ADB via Ethernet in the Emteria options in settings

While Emteria is booted I am able to connect to the device from adb on Windows, however if I try to use the adb sideload command, I get the errors:

adb: sideload connection failed: no devices/emulators found
adb: trying pre-Kitkat sideload medthod...
adb: pre-Kitkat sideload connection failed: no devices/emulators found

I'm not sure if I should expect to be able to sideload Gapps while Emteria is booted or not.

If I reboot to recovery, I'm aware that Emteria for RPi4 does not currently have TWRP, but in the recovery menu there is a load from ADB option. If I choose that the device appears to tell me to go ahead and use adb sideload.

However, while in this recovery state, the RPi4 doesn't appear to be connected to the network via ethernet or WiFi (not sure if I should expect it to be) but adb devices shows nothing even when the RPi4 is connected to the PC via USB, so I can't use sideload there either...

Anyone got any pointers?

I think it is obvious to everyone that a huge amount of the interest in Emteria and Android on RPI is related to in-car infotainment. This is a huge application area and I think there are a couple of things holding emteria back in this regard that I will get to later.

But for now, some good news - I have got Apple Carplay working using a carplay usb dongle, RPI and Emteria 0.7.1

There is huge interest in getting car play working on the PI. E.g. see here:
https://www.raspberrypi.org/forums/viewtopic.php?f=35&t=76298&p=1523831#p1523831

There are a number of issues holding this back:
- Bluetooth support - my dongle supports wireless carplay, but with no bluetooth support I am limited to plugging my phone into the dongle.
- RPI 4 support
- Latest version of Emteria 0.8.1 does not support the official RPI touchscreen (DSI).
- Support for external USB sound card

Would be great to see progress in these area - I think there are a lot of potential users waiting in the wings if these can be solved.

Edit: This USB mic and audio out splitter is working for me on Emteria 0.7.1: https://www.amazon.co.uk/gp/product/B01N905VOY/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1

Can you please share - how I can upgrade the version of my app that I have already installed on emteria.

I used a 7 Inch 1024 x 600 capacitive LCD, Pi 3 b, a random 10.000 mah power bank and a bluetooth telescopic controller gamepad.

I hope its ok if I share a link to a video of me building it https://youtu.be/qhip44DkqRg

Also is there anyway to put the os in to like a hibernation? .My complaint is boot times are kinda slow. Would love to speed that up or maybe hibernation or sleep mode?

Or I am open to other hardware than raspberry pie

Thoughts???

Thanks
Mike

Now I need to know if it is possible to use an FM module via i2c and use some program to be able to tune the radio.
I know I can listen to the radio on the internet, but I would like to do it using the FM module. It would be fantastic! I don't know if Emteria can be the solution, but if you can help me I would be very grateful. And sorry for my english, I hope you haven't trouble reading this message.

1. Replugin in the USB GPS
2. Run 'dmesg' in terminal and see the message "usbfs: process xxxx (pool-7-thread-1) did not claim interface 0 before use" (
3. Accept the prompt that pops up "Allow the app UsbGps to access the USB device" (This prompt will allways pop up even if I hit the "Use by default..." checkbox.
4. Restart the UsbGps4Droid service
5. GPS will finally get a location

This is definitely not a desired procedure for use in my car infotainment system. I'm on the cusp of purchasing a full version of emteria but I can't until I can get this figured out.

Has anyone found a way to get the USB working immediately after boot?

Does Emteria.os run in the Raspberry 4??

Second question...

Is USB 3.0, ethernet and micro-hdmi supported??

And the last question..

If it's not supported, can the team make a release that is compatible with the Raspberry 4?? (1GB, 2GB and 4GB models)

You can take photos and that is great, but you can't focus, do HDR, no dual front cameras support, resolution config, and you can't even take a video...

It would be great to have more functions, because I want to make a tablet (probably lots want to make one), and it will have a 8MP camera (the V2 from Raspberry)

Can someone explain to me please how to install lirc packege to use infrared (IR) remote control?

As mentioned in the topic here: https://forum.emteria.com/discussion/665/help-needed-for-python-smbus-and-i2c-tools#latest

I did some tests with the UPS HAT for the Raspberry 3B (without + because of incompatiblity with POE PIN Out on B+) which worked in a special way but I'm not convinced about my results yet.

What does the Unit: the Unit is designed to work with the pi 3 as an UPS (uninterruptable power supply which means it can handle powercuts and so on).

Integrated RTC and the most important for my project as a voltage transformer it has a seperate 2way in for voltage from 7 to 48 V DC wich makes it perfect to supply juice from a car, or boat or something. The Unit is controlled and configured by a deamon wich is written only for raspbian in python i think. So i did some research an tried a dual use install on emteria with a package called DEBIAN KIT on F-Droid. It worked in a way but not a 100 percent and I'm not sure where the show stoppers are.

First thing that i noticed is, emteria has problems with the integrated rtc ds1307 as mentioned in this topic here: https://forum.emteria.com/discussion/522/enable-i2c-and-install-a-rtc#latest

My first thought about this was, its something headed to the dualuse install on the kernel, that debian and android are grabbing for the same device at the same time, but this problem is also present without debian installed on emteria.

The second thing which is difficult is the behavior of the file save shutdown function from the HAT. Because raspbian and emteria seem to use different commands to shutdown the OS and so nothing happens if you cut the mainpower and the timer runs down to whats configured e.g. file save shutdown after 30 seconds.

I think this unit could be a very good upgrade for the pi especiallly running Emteria but its necessary to get it running properly.

So I'm ready to spend your company one of this units for free (I'm not connected to them in anyway, I'm only a private customer) if you say there will be a chance for integration.

here the links to the product, and manual and driver/software (deamon)

the company and site is written in german but i link the EN sites

https://olmatic.de/en/products/susv/

https://olmatic.de/en/downloads/#1543223443287-9a54167f-6302 (general download page for software and manuals)

https://s-usv.de/files/pdf/SUSV_Manual_Rev2_0_EN.pdf (download link for the manual)

As is saw today it seems the HAT works with tinker board and UP board too.

I'm looking forward to hearing from you.

Best Regards

Kevin.

private void createWebPrintJob(WebView webView) {

    // Get a PrintManager instance
    PrintManager printManager = null;
    if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.KITKAT) {
        printManager = (PrintManager) getBaseContext()
                .getSystemService(Context.PRINT_SERVICE);
    }

    String jobName = getString(R.string.app_name) + " Document";

    // Get a print adapter instance
    PrintDocumentAdapter printAdapter = null;
    if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.LOLLIPOP) {
        printAdapter = webView.createPrintDocumentAdapter(jobName);
    }

    // Create a print job with name and adapter instance
    PrintJob printJob = null;
    if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.KITKAT) {
        printJob = printManager.print(jobName, printAdapter,
                new PrintAttributes.Builder().build());
    }
    if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.KITKAT) {
        printJob.restart();
    }
    // Save the job object for later status checking
    //mPrintJobs.add(printJob);
}


private WebView mWebView;

private void doWebViewPrint() {
    // Create a WebView object specifically for printing
    WebView webView = new WebView(getApplicationContext());
    webView.setWebViewClient(new WebViewClient() {

        public boolean shouldOverrideUrlLoading(WebView view, String url) {
            return false;
        }

        @Override
        public void onPageFinished(WebView view, String url) {
            createWebPrintJob(view);
            mWebView = null;
        }
    });

    // Generate an HTML document on the fly:
    String htmlDocument = "<html><body><h1>Test Content</h1><p>Testing, " +
            "testing, testing...</p></body></html>";
    webView.loadDataWithBaseURL(null, HtmlEmail, "text/HTML", "UTF-8", null);

    // Keep a reference to WebView object until you pass the PrintDocumentAdapter
    // to the PrintManager
    mWebView = webView;
}

firstly I'll introduce what's planned with Emteria.OS.
I want to integrate a Raspberry based headunit running Emteria in my car, therefor I do evaluate your OS since a Month. The most things I need to run are working very well. Now there is the ultimate Showstopper. I bought a UPS from the german Company Olmatic called S.USV advanced. It's designed to work perfectly with the Raspberry but to control and configure the behavior of the unit (its also a VRM, so it regulates the 12V Boardvoltage down to whats needed on the Pi and HATS and RTC is integrated too) there is the installation of the two tools necessary. On their manual they point out howto do it on raspbian. Is there a way to get these packages into and upto running on Emteria?

I'm looking forward to hearing from you with a positiv feedback ;-)
If this works I'm going to buy a business license.

Please let me know how to ennable it so i can edit custom resolution as i desire.
Thanks,
Aakash

I,m currently doing a project with emteria os installed on rpi 3 with the rpi touchscreen, everything is working well for the basics.

The goal was to get real-time info via Bluetooth from my ecu (MaxxECU) using the vendors software (Mdash).
The the software is working well but when the connection is made via Bluetooth it reads the data for a few minutes then it stops reading, the software and the pi is still connected/paired to the ecu and the app is not frozen as I can still make other adjustments with the gauges etc.

In order to resolve this I either have to completely close off the app and relaunch it or restart the rpi. I also disabled all the other apps and even tried turning on "do not disturb mode" with little help.

The temp of the pi is good and it has at least 400MB free memory so I'm thinking it could be a fault on the Bluetooth side of things idk..... any advice will be appreciated

or has someone else tip

greet Mathias

https://docs.unity3d.com/Manual/class-PlayerSettingsAndroid.html

I'm playing a little bit with the Raspberry PI and found Emteria while searching for information about the Raspberry.
Good job !
It runs almost stable and I was able to install Google Play.

Now I'm interested to use the tiny Raspberry as navigation system in the car. Unfortunatelly GPS dosn't work. I connected a GPS Mouse via USB and the installed TomTom App dosn't found the GPS module.

Is there any possibility to get GPS working?

Regards
Supergrobi

Boot loop screen:

please post your experiences with our feature App Autostart here. If you experience any issues, please state in detail what you did and what the problem is.

Thanks,
Philipp