Problem with running Fritzcam App. Louncher3 is closing

Andre12

I tryed today to run the Fritz cam App. but the motion stream is stopping after 3 sekonds the app.it self sems to still work but if i close the app due to the non working webcam the whole System is going nut#s a scren is poping up with the message: Louncher3 is closed reopen the app. after that i can not use any apps anymore and have to shut the system down, after a restart the system will run but the Fritzcam app. has the same problem after start

Andre12

now i tried the ip webcam apk it has the same behavior as the Fritzcam app. it seems that as soon as the streaming service start´s the system(streaming) will freez when i leave the app. and come right back to it the cam will start to be active show a motion pic. but shuts down with a freez pic. as the conection will establish

is that a licining problem with the free evaluation version of Emteria ??

BaranT

I am not sure if it is a problem caused by the fact that you are using the evaluation version.

I guess your issue could be caused by a lack of memory. Can you try to shoot some photos instead of doing a video? So we could now if the device causes any problems.

Maybe you also should search in the forum for some related issues. I just e.g. found this:
#24911

Andre12

thats to bad, i was hoping it works , the problem is the apps are opening a conection via http. with a stream and if the conection is established it will stop right a way . I can not take only a picture i dont have the option

IKS

What screen resolution do you use?

Andre12

@IKS thanks for your answer, the problem with the app. is that i can't change the resolution in the app. it self . I think the app is requesting the max resolution over the system it self. I tryed different apps. till now and all have the same behavior

kknott

The wyzecam app works well, even the beta version installed from the google play store. You’ll want to enable force_turbo=1 and gpu_mem=256 in the config.txt file under boot to reduce freezes.