Somes issues

X2005254

I'm trying to configure the emteria os to running into my car with the factory gps screen it work but many options don't works :

AV coposite output don't work even if I change setup into config.txt file only hdmi works. I had raspbmc before on my raspberry and i was working with composite output.
Bluetooth headset connected but sound and microphone don't work at all.
On waze application map is black and impossible to have navigation. Only waze menu configuration work no map screen is black at this part. Weird but as I sax previously in another message someone have the same problem and not fixed.
Developers option isn't present in the emteria os.

Please let me know when solution found, I bought basic emteria OS to have a work solution.

Thanks in advance for reply.

Best regards,

IKS

Did you set the correct configuration in config.txt for sdtv? Check out https://www.raspberrypi.org/documentation/configuration/config-txt/video.md
As mentioned in the other thread, the bluetooth support isn't full yet. We are working on this.
There is not much we can do. Application has to support RPi's color mode.
https://www.greenbot.com/article/2457986/android/how-to-enable-developer-options-on-your-android-phone-or-tablet.html

X2005254

Thanks for response and reactivity.

Please find my reponses bellow :

I set sdtv_mode 0 and 3 (not in the same time) one of them show me a signal with grey fond only but nothing happen, and sdtv_ration 1 2 then 3 (not in the same time) nothing better, and hdmi_ignore_hotplug=1, Nothing news.. and different cable one of them work on my raspberry pi 2 model b with rapsbian pi.. anyway I'm working on it....
Thanks for bluetooth investiguation and fix hopefully soon 😉
Done thanks I will contact waze support now 🙂
Oups I forget this newbe action, I was pretty sure that is enable by default...

So hope this emteria os project will perfom all theses point that I need to finalise my smart car system and it's closed to.. hope I will not need to buy another single board system like odroid or cubieboard who seems to work natively with android blablabla because I love Raspberry 🙂

I'm sure you doing a great job that isn't simple to make android run fully compatible with hardware.

Good luck and waiting for news...

X2005254

Hi Kalkov I really need rca working i did two test with the same config on my pi2 with linux and pi3 with android. So pi2 work fine, pi3 pre-boot work on rca with the good config.txt file but when emteria os boot the screen become grey and nothing happen till I plug hdmi cable. So when i plug hdmi screen become black and tv say no source so if I switch to my hdmi input emteria boot, so it looks like emteria wait absolutely for hdmi to boot, please perform and fix this fonctionality, i really need it on my car i don't have hdmi. Also with hdmi to rca converter quality is too bad than real rca signal.

Thanks in advance.