obero
About
- Username
- obero
- Joined
- Visits
- 1,379
- Last Active
- Roles
- Member
Comments
-
Hi Igor! I found this on the net accidentally. https://howtoraspberrypi.com/install-android-raspberry-pi/#pll_switcher I tried it out of curiosity, but I did not like it and did not complete the installation. I found two things interesting. 1. Th…
-
Thank you, I found the solution.
-
Unfortunately, I can't help you because I don't get it. I found it after a long research, I thought someone else could use it. Although its use is difficult, only those who know programming can answer it.
-
Try this. Notify me how you managed. It worked for me, but the switching was cumbersome, somebody should have some helpful help. I used this USB2.0 UVC Audio Video Capture Card Adapter Recorder Analog to Digital for Android Win OSX IOS Available …
-
Try this. Tell me you succeeded https://www.febon.net/products/usb20-febon100-uvc-cvbs-composite-capture-card It worked for me, but the switching was cumbersome, somebody should have some helpful help.
-
Ok.Thanks.
-
I have installed, enabled and have not detected any errors so far. Does Emteria use this Pin?
-
Thank you, I just want to use the authorized Emtera. So can i install it, will it work fine?
-
Is there no solution for improving the screen resolution?
-
@Martin , Thank you for your help, I will try what you have suggested, but the bigger problem is the quality of the image and its resolution. Sometimes the picture is uncomfortable, very confusing. There is definitely some solution.
-
I would have another problem. The 0.6.0 is on my machine with a good quality 32Gb SD card with an original raspi screen. The screen resolution is 800x480, the quality is very bad. I enclosed 2 pictures that you can see well. It freezes during opera…
-
Igor! Thank you for dealing with the problem, Unfortunately I don't know where the kernel log is located, please specify where you are located.
-
Thanks,
-
Igor! Thank you, after several attempts.
-
Yes. https://wiki.52pi.com/index.php?title=7-Inch-1024x600_Display_Kit_(with_Touch_Screen)_SKU:Z-0017
-
That is exactly the case.
-
Where does it work where it does not work. Once you have a tapping, you have to tap more times.
-
I tried but can not because it says it is activated.
-
There are two things mixed here, mine is a special topic, we're discussing elsewhere.
-
Yes, it senses the touch, but is insecure. You can not work with him. However, it works well during RECOVERY. I could help? Combining back means insecurity, it does not do what I touched. Or you have to touch or react multiple times. It is difficult…
-
I add: I have a version of 0.5.21 now, in RECOVERY the touch function is wonderful but not good on the system. It senses the touch, but it works back and forth, it can not be used.
-
Connection is HDMI, the picture is ok, but the touch is malfunctioning unreliable, nor does it approach the operation under RECOVERY
-
Which part is not clear?
-
This is not a question. The question is how to work well under Emteria.
-
My friends! This is a resistive screen, which is really less sensitive than capacitive. But it works well, as close as the capacitance. I found this when I tried in RECOVERY. It worked perfectly. This status must be passed on to the Android system. …
-
I look forward to Kalkov's response, but he did not reply to my letter addressed to me either. He certainly knows how to solve it.
-
I was upgraded to the latest version - 0.6.0 but the touch quality did not change. The solution is located in RECOVERY, it works the touch as it should. The solution can only be done by anyone who wrote a program. I hope to read my post and resolve t…
-
I was upgraded to the latest version - 0.6.0 but the touch quality did not change. The solution is located in RECOVERY, it works the touch as it should. The solution can only be done by anyone who wrote a program. I hope to read my post and resolve t…
-
Development in touch operation. I accidentally found that touching in RECOVERY mode works like a dream. Restarted from RECOVERY mode, when OS is loaded, the touch is reconnected and unreliable. Does anyone know how to resume good operation under RECO…
-
Development in touch operation. I accidentally found that touching in RECOVERY mode works like a dream. Restarted from RECOVERY mode, when OS is loaded, the touch is reconnected and unreliable. Does anyone know how to resume operation in RECOVERY dur…
-
Can not you copy the missing files to the last two partitions?
-
As I said, I tried everything I found on the net.
-
Unfortunately I can not use SSH on Emtery. It's complicated for me. I downloaded Terminal Emulator.
-
Windows 10 utolsó frissítés, Ubuntu, Mindkettőn próbáltam, nem lehet formázni, a particiókat sem lehet törölni. A kép egy komplett partició törlés után készült.
-
Nem, minden neten található megoldást végigpróbáltam, és változatlan maradt.
-
Használni akartam ezt a kártyát, de semmilyen módszerrel nem tudtam letörölni, formázni. Beraktam az RPi-be és működött a RECOVERY. Minden újra indítás után visszatért a RECOVERY. Ugyanakkor észrevettem, hogy az érintőképernyőm (…
-
I really did expect an answer, but Kalkov had no response. I wanted to put Emtera again when this error came out. I can not believe there is no solution. I do not want to throw it out. It works until RECOVERY. But then he can not go any further. Can…
-
I'm sorry to translate. I've tried everything I've found on the web. This is a bug report and can not do anything with the card.
-
I have a paid version, I have tried USB, Card reader, but no one to write the picture. You can not format the card, delete partitions
-
Dino! Can you explain more what you mean?
-
Well, unfortunately, I have this problem, and I have tried all the solutions available on the Internet with lots of adapters, Windows, Linux, but with two quality cards I can not start, but I really should.
-
Did you use this kind of screen? And the emteria under Os? As I mentioned under Raspberry, it works brilliantly without any special adjustments. This operation ceases after installing Emteria Os. I tried to do this in the description after installin…
-
Hello. The screen is resistive and has a USB connection The exact description is here https://www.wiki.52pi.com/index.php?title=7-Inch-1024x600_Display_Kit_(with_Touch_Screen)_SKU:Z-0017#Compatibility_List Connected to Raspberry Pi3 + I hope I h…
-
I bought a 7 "SKU: Z-0017 touchscreen, which is factory-compatible with Raspberry Pi. That's true under Raspberry, the touch does not work with any calibration exactly. After installing Emteria, the touch does not work. knowing it is here, the expert…
-
Unfortunately, I'm not in my acquaintance, so I have to wait for another solution. But thank you for trying to help me out.
-
I'll accept you if you answer, I'm waiting for patience. There was no reaction.
-
I see this problem is unsolvable. Or I do not care about anyone.
-
Hi,Igor! I'm asking for your help. I have three quality SD cards I can not use, can not format and write cards because the system you use can not be deleted or formatted. I've tried all the options I found on the net, with all kinds of adapters, lot…
-
I think I've managed to find the solution to the installation problem. It can not be installed directly from version 0.5.9. I installed it and it 0.5.6 works, update it to version 0.5.14 without any problems
-
I can not connect to either YouTube or Google Play. Internet connection works. This new 0.5.11. after updating. I thought I tried the other RPi3, but I tried it before and YOUTUBE and GOOGLE PLAYER worked well. It automatically started updating to 0…