eleclabs 10.1 touchscreen
I have been trying to get the ElecLabs 10.1 touchscreen to work with Emteria and my Pi4 8GB. I have been able to get it working via fydeos and have used the same settings for the overrides. Below are my overrides. You will notice several commented out as they apply to the kernel used for fydeos, which I attempted to use and it just got stuck in a boot loop. With these settings the display is recognized but it never goes into the OS. Could this be because the screen is 2560x1600? Any help would be greatly appreciated as I am attempting to make a customized Google Hub. The only reason I didn't use FydeOS is a bug where I can't use any camera including the PiCam so I had to move on to attempt something else. I have already tried to use several versions of Android from KonstaKang but there is an issue with Google Home not working without a device id and the developer won't respond back to any of my messages. (had to use SQL comments for the purposes of this post as the hashtag makes the line bold)
/#arm_64bit=1
max_framebuffers=2
/#kernel=kernel8_a.img
/#disable_splash=1
arm_boost=1
force_turbo=1
dtoverlay=vc4-fkms-v3d
display_auto_detect=1
disable_fw_kms_setup=1
/#ElecLabs10.1TouchScreenSetting
hdmi_force_hotplug=1
hdmi_group=2
/#hdmi_mode=77
hdmi_mode=87
hdmi_ignore_edid=0xa5000080
hdmi_timings=2560 0 48 32 80 1600 0 4 6 36 0 0 0 60 0 268630000 3
hdmi_drive=2
/#hdmi_drive=2
config_hdmi_boost=7
disable_overscan=1
dtparam=audio=on
cma_lwm=16
cma_hwm=32
gpu_mem=256