0.5.0 does not install
Hello,
I'm Fernando and I want to apologize first because this message is translated with Google, I'm Spanish and my English is not good.
I want to test your product because I find it interesting, but I can not install it.
Tested with two SD's (16 & 32GB class 10) that work with Raspbian and even with RaspAnd (it's not what I want).
SD created with installer for Linux (Mint 18) and with Win10.
I just get the rainbow screen, nothing more.
I set the SD in linux and I do not find log's that contribute anything.
Using version 0.5.0 (the current one).
I see that the OEM partition is empty, the installer gives a fault "Failed seekRaw: 22"
I see that the OTA.img does not seem to be used.
I would like to help me test your product.
Thank you.
Here the installer log:
+00:00 (, 0) QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
+00:02 (, 0) QQmlExpression: Expression qrc:/main.qml:260:18 depends on non-NOTIFYable properties:
+00:02 (, 0) PlatformAdapter::isDevelopmentMode
+00:02 (, 0) QQmlExpression: Expression qrc:/main.qml:236:30 depends on non-NOTIFYable properties:
+00:02 (, 0) PlatformAdapter::canRestart
+00:02 (, 0) QQmlExpression: Expression qrc:/main.qml:229:31 depends on non-NOTIFYable properties:
+00:02 (, 0) PlatformAdapter::restartHint
+00:02 (, 0) QQmlExpression: Expression qrc:/main.qml:222:30 depends on non-NOTIFYable properties:
+00:02 (, 0) PlatformAdapter::hasRestartHint
+00:02 (, 0) QQmlExpression: Expression qrc:/main.qml:215:27 depends on non-NOTIFYable properties:
+00:02 (, 0) PlatformAdapter::superuserMessage
+00:02 (, 0) QQmlExpression: Expression qrc:/main.qml:197:22 depends on non-NOTIFYable properties:
+00:02 (, 0) PlatformAdapter::isSuperuser
+00:02 (, 0) QQmlExpression: Expression qrc:/LoginForm.qml:131:21 depends on non-NOTIFYable properties:
+00:02 (, 0) ImageAdapter::defaultImageLocation
+00:02 (file:///tmp/.mount_EmteriVAzNKc/usr/qml/QtQuick/Dialogs/DefaultFileDialog.qml, 210) file:///tmp/.mount_EmteriVAzNKc/usr/qml/QtQuick/Dialogs/DefaultFileDialog.qml:210:25: QML ListView: Binding loop detected for property "model"
+00:02 (, 0) QQmlExpression: Expression qrc:/main.qml:61:22 depends on non-NOTIFYable properties:
+00:02 (, 0) PlatformAdapter::isSuperuser
+00:02 (qrc:/main.qml, 219) qrc:/main.qml:219:17: QML Rectangle: Binding loop detected for property "height"
+00:03 (qrc:/main.qml, 42) qrc:/main.qml:42: TypeError: Cannot read property 'identifier' of undefined
+00:19 (, 0) Refreshing drives
+00:20 (, 0) Found 2 drives
+01:19 (, 0) Refreshing drives
+01:19 (, 0) Found 1 drives
+01:23 (, 0) Adding "boot.zip"
+01:23 (, 0) Adding "oem.zip"
+01:23 (, 0) Adding "ota.zip"
+01:23 (, 0) Adding "system.zip"
+01:23 (, 0) Got 4 files to download
+01:23 (, 0) Downloading "package.json"
+01:23 (, 0) Using path "/home/XXuserXX/.local/share/Emteria/Installer/rpi3-v0.5.0/package.json"
+01:24 (, 0) Finished download of "package.json"
+01:24 (, 0) Already downloaded correct "boot.zip"
+01:24 (, 0) Already downloaded correct "oem.zip"
+01:31 (, 0) Already downloaded correct "ota.zip"
+01:38 (, 0) Already downloaded correct "system.zip"
+01:38 (, 0) Finished DownloadWorker
+01:38 (, 0) Flashing on raw "/dev/sdb"
+01:38 (, 0) Initializing PackageWriter
+01:38 (, 0) Package base path: "/home/XXuserXX/.local/share/Emteria/Installer/rpi3-v0.5.0"
+01:38 (, 0) Drive: "Multi-Card at /dev/sdb" with 31393316864 bytes
+01:38 (, 0) Raw at "/dev/sdb"
+01:38 (, 0) Mounted at "/media/XXuserXX/boot"
+01:38 (, 0) PackageWriter initialized successfully
+01:38 (, 0) Starting step 0 Reading package
+01:38 (, 0) Finished step 0 Reading package
+01:38 (, 0) Starting step 1 Verifying files
+01:40 (, 0) Finished step 1 Verifying files
+01:40 (, 0) Starting step 2 Preparing
+01:40 (, 0) Finished step 2 Preparing
+01:40 (, 0) Starting step 3 Opening to write
+01:40 (, 0) Finished step 3 Opening to write
+01:40 (, 0) Assuming drive has 61315072 sectors
+01:40 (, 0) Processing 4 partitions
+01:40 (, 0) Processing partition "boot"
+01:40 (, 0) Using LBA of 2048
+01:40 (, 0) Size determined from zip source: 65011712
+01:40 (, 0) Partition will occupy 126976 sectors
+01:40 (, 0) Processing partition "system"
+01:40 (, 0) Using LBA of 129024
+01:40 (, 0) Size determined from zip source: 2147483648
+01:40 (, 0) Partition will occupy 4194304 sectors
+01:40 (, 0) Processing partition "oem"
+01:40 (, 0) Using LBA of 4323328
+01:40 (, 0) Size determined from zip source: 67108864
+01:40 (, 0) Partition will occupy 131072 sectors
+01:40 (, 0) Processing partition "userdata"
+01:40 (, 0) Using LBA of 4454400
+01:40 (, 0) Processing dynamically sized partition "userdata"
+01:40 (, 0) Partition will start at LBA 4454400
+01:40 (, 0) Remaining sectors on drive: 56860672
+01:40 (, 0) Starting step 4 Writing MBR
+01:40 (, 0) Partitions in MBR:
+01:40 (, 0) Partition 0 bootable true LBA 2048 size 126976
+01:40 (, 0) Partition 1 bootable false LBA 129024 size 4194304
+01:40 (, 0) Partition 2 bootable false LBA 4323328 size 131072
+01:40 (, 0) Partition 3 bootable false LBA 4454400 size 56860672
+01:40 (, 0) Finished step 4 Writing MBR
+01:40 (, 0) Starting step 5 Writing file
+01:40 (, 0) Using zip file at "/home/XXuserXX/.local/share/Emteria/Installer/rpi3-v0.5.0/boot.zip"
+01:48 (, 0) Finished step 5 Writing file
+01:48 (, 0) Starting step 5 Writing file
+01:48 (, 0) Using zip file at "/home/XXuserXX/.local/share/Emteria/Installer/rpi3-v0.5.0/system.zip"
+05:55 (, 0) Finished step 5 Writing file
+05:55 (, 0) Starting step 5 Writing file
+05:55 (, 0) Using zip file at "/home/XXuserXX/.local/share/Emteria/Installer/rpi3-v0.5.0/oem.zip"
+05:55 (, 0) Failed seekRaw: 22
+06:02 (, 0) Finished step 5 Writing file
+06:02 (, 0) Starting step 6 Creating file system
+06:02 (, 0) Creating ext4 filesystem from scratch, ideal size is 56860672
+06:02 (, 0) Closest script size is 55349760
+06:23 (, 0) Finished step 6 Creating file system
+06:23 (, 0) Starting step 7 Validating
+06:28 (, 0) Finished step 7 Validating
+06:28 (, 0) Starting step 8 Finalizing
+06:28 (, 0) Finished step 8 Finalizing
Comments
Hi @sagasa, I'm sorry you experience issues with our installer. Do you have a possibility to test another sdcard adapter? BTW: we have uploaded a new version of the installer, you may want to try it out.
OK Thanks, in a few days I will be able to try another adapter and I will also try the new installer.