Screen resolution and setting codes
Hi Kalkov,
Trying to run Emteria on Pi3 and Sony Bravia TV
get ""Unsupported signal check your device input"
I know I have to edit the config and build files.
But how do I know what codes to use for tv ?
hdmi_group=1?
hdmi_mode=1?
hdmi Drive ?
I figured out for a tv group needs to be 1 for CEA ?
The resolution of 1280x720 should work as it is a full HD tv
Please help
Regards
0
Comments
Changes to the
config.txtare not emteria-specific, so you have to refer to the official documentation: https://www.raspberrypi.org/documentation/configuration/config-txt/video.mdHi Kalkov,
Tried this settings( and many more)
See startup and then ...Still the same message("Unsupported signal check your device input"),
What am I missing ?
It then keeps looping the startup
hdmi_group=1
hdmi_drive=2
hdmi_mode=19
hdmi_cvt=1280 720 50 1 0 0 0
hdmi_force_hotplug=1
disable_overscan=1
dtoverlay=vc4-kms-v3d,cma-256
avoid_warnings=2
dtparam=audio=on
dtparam=i2c1=on
dtparam=i2c_arm=on
audio_pwm_mode=2
initial_turbo=30
start_x=1
kernel=u-boot.bin
any help ?
Regards
i'm bored of this too...........
(how is it that rassbian works on any HDMI TV out of the box without pi$$ing about with config files?)
Anyway,I'm off to find another hobby
Seems this Post dies here... Anybody out there that can help ?
Tried it on 2X other TV 's works without no problem
What is the difference on the Sony Bravia ?
Raspian, Kodi everything else works fine on the Bravia...
What setting am I missing ?
Herewith the specs..
https://www.cnet.com/products/sony-bravia-kdl-40ex400/specs/
Any help would be appreciated.
Regards
Did you read https://help.emteria.com/kb/devices-rpi-3#custom-screen-resolution ?
Quickly read through it.....you might be on to something
how do i use vc4-fkms-v3d overlay?
Regards
You replace the old overlay name by the new one
EDIT: I have updated https://help.emteria.com/kb/devices-rpi-3#custom-screen-resolution
Hi Kalkov,
It Worked! thanks allot !