Installation failed

samgiveslssamgivesls
edited October 2018 in OS installer

+00:00 (, 0) Starting emteria installer v0.5-9-g29c7cde
+00:02 (qrc:/main.qml, 221) qrc:/main.qml:221:17: QML Rectangle: Binding loop detected for property "height"
+00:07 (, 0) Refreshing drives
+00:08 (, 0) Ignoring system drive "Samsung SSD 840 EVO 250GB"
+00:08 (, 0) Ignoring system drive "TOSHIBA DT01ACA300"
+00:08 (, 0) Found 1 drives
+00:09 (, 0) Refreshing drives
+00:10 (, 0) Ignoring system drive "Samsung SSD 840 EVO 250GB"
+00:10 (, 0) Ignoring system drive "TOSHIBA DT01ACA300"
+00:10 (, 0) Found 1 drives
+00:10 (, 0) Refreshing drives
+00:11 (, 0) Ignoring system drive "Samsung SSD 840 EVO 250GB"
+00:11 (, 0) Ignoring system drive "TOSHIBA DT01ACA300"
+00:11 (, 0) Found 1 drives
+00:11 (, 0) Refreshing drives
+00:13 (, 0) Ignoring system drive "Samsung SSD 840 EVO 250GB"
+00:13 (, 0) Ignoring system drive "TOSHIBA DT01ACA300"
+00:13 (, 0) Found 1 drives
+00:13 (, 0) Refreshing drives
+00:14 (, 0) Ignoring system drive "Samsung SSD 840 EVO 250GB"
+00:14 (, 0) Ignoring system drive "TOSHIBA DT01ACA300"
+00:14 (, 0) Found 1 drives
+00:14 (, 0) Refreshing drives
+00:15 (, 0) Ignoring system drive "Samsung SSD 840 EVO 250GB"
+00:15 (, 0) Ignoring system drive "TOSHIBA DT01ACA300"
+00:15 (, 0) Found 1 drives
+00:15 (, 0) Refreshing drives
+00:16 (, 0) Ignoring system drive "Samsung SSD 840 EVO 250GB"
+00:16 (, 0) Ignoring system drive "TOSHIBA DT01ACA300"
+00:16 (, 0) Found 1 drives
+00:16 (, 0) Refreshing drives
+00:18 (, 0) Ignoring system drive "Samsung SSD 840 EVO 250GB"
+00:18 (, 0) Ignoring system drive "TOSHIBA DT01ACA300"
+00:18 (, 0) Found 1 drives
+00:19 (, 0) Downloading "package.json"
+00:19 (, 0) Using path "C:/Users/S-PC/AppData/Local/Emteria/Emteria.OS Installer/rpi3-v0.5.21/package.json"
+00:20 (, 0) Finished download of "package.json"
+00:20 (, 0) Checking for OEM config...
+00:20 (, 0) Retrieved OEM config len = 4
+00:20 (, 0) Already downloaded correct "boot.zip"
+00:20 (, 0) Already downloaded correct "oem.zip"
+00:21 (, 0) Already downloaded correct "system.zip"
+00:21 (, 0) Finished DownloadWorker
+00:21 (, 0) Flashing on raw "\\\\.\\PHYSICALDRIVE2"
+00:21 (, 0) Initializing PackageWriter
+00:21 (, 0) Package base path: "C:/Users/S-PC/AppData/Local/Emteria/Emteria.OS Installer/rpi3-v0.5.21"
+00:21 (, 0) Drive: "TS-RDF5 SD Transcend USB Device" with 32026656768 bytes
+00:21 (, 0) Raw at "\\\\.\\PHYSICALDRIVE2"
+00:21 (, 0) Mounted at "F:"
+00:21 (, 0) Mounted at "G:"
+00:21 (, 0) Mounted at "H:"
+00:21 (, 0) Will write 4 bytes as OEM config data
+00:21 (, 0) PackageWriter initialized successfully
+00:21 (, 0) Starting step 0 Reading package
+00:21 (, 0) Finished step 0 Reading package
+00:21 (, 0) Starting step 1 Verifying files
+00:21 (, 0) Finished step 1 Verifying files
+00:21 (, 0) Starting step 2 Preparing
+00:22 (, 0) Diskpart output: "\r\nMicrosoft DiskPart version 10.0.17134.1\r\n\r\nCopyright (C) Microsoft Corporation.\r\nOn computer: S_PC\r\n\r\nDisk 2 is now the selected disk.\r\n\r\nThe volume you selected is not valid or does not exist.\r\n\r\nThere is no volume selected.\r\n"
+00:22 (, 0) Diskpart error: ""
+00:24 (, 0) Failed to remove drive letter "F:"
+00:24 (, 0) Failed to prepare drive

Comments

This discussion has been closed.