USB device doesn't work if inserted before power up

edited June 2020 in Supported devices
I am using Emteria with a USB dongle that talks to another device. If the dongle is plugged in when Emteria is started, it is not detected by the application. If you unplug it and plug it back in, it works fine. The dongle beeps when first plugged in and beeps several times during the boot up if it's already in there.

Hoping to figure out how I can avoid having to mess with this device to get it working again when it reboots or unexpectedly loses power.

Fresh bugreport just submitted.


  • Your application has to be set directBootAware with some additional configs. See
Sign In or Register to comment.