Crashes on Kernel Startup
Hi! I'm trying to get Emteria to work on a Raspberry Pi 3. Every time I flash it to my Micro SD card and turn on my Raspberry Pi I get a message saying "Starting up Kernel..." and then it just crashes. I've tried flashing it on two different operating systems, but I still get the same results. Does anyone know a way to fix this? Thanks!
0
Comments
Hi @bootsie123. Are there any details you can share with us? A tracelog or the panic message from the kernel? It is typically printed to the console after a crash. We will be happy to fix this error, but we need to know what exactly is causing it.
Hi @kalkov. I don't think I have enough info for you, but here's what comes up once the Raspberry Pi is turned on.
Net: No ethernet found. starting USB... USBO: Core Release: 2.80a scanning bus 0 for devices... 3 USB Devices(s) found scanning usb for storage devices... 0 Storage Device(s) found autoboot in 1 seconds, enter stop to stopswitch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot.scr.uimg reading /boot.scr.uimg 401 bytes read in 15ms (25.4 KiB/s) ## Executing script at 02000000 reading zImage 7395304 bytes read in 397 ms (17.8 MiB/s) reading ramdisk.uimg 1545816 bytes read in 102 ms (14.5 MiB/s) Kernal image @ 0x1000000 [ 0x000000 - 0x70d7e8 ] ## Loading init Ramdisk from Legacy Image at 02100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 1545752 Bytes = 1.5 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 2effb400 Booting using fdt blob at 0x2effb400 reserving fdt memory region: addr=0 size=1000 Using Device Tree in place at 2effb400, end 2f002fbe Starting kernel...After the "Starting kernel..." my monitor hooked up to the Raspberry Pi loses it's signal and just goes black. I hope this is enough to help fix the issue. Let me know if I can do anything else for you.
@kalkov Any update on this issue?
@bootsie123, we need a kernel log with the panic message. Otherwise we don't know where the problem is. If there is chance you can connect a serial-to-usb-adapter (https://elinux.org/RPi_Serial_Connection) and capture the log, we will be happy to fix the issue.
I get the same thing on my. pi and no I can't connect a serial to usb adapter
Use High power charger adaptor 5v -2amp , it works for me