failed writing from image boot.zip
I used the installer and got to the last part but i get two notices saying failed writing partition image and failed writing from image boot.zip. What can I do to fix this?
0
This discussion has been closed.
Comments
Post the log here and someone will help you.
+00:12 (, 0) QQmlExpression: Expression qrc:/main.qml:260:18 depends on non-NOTIFYable properties:
+00:12 (, 0) PlatformAdapter::isDevelopmentMode
+00:12 (, 0) QQmlExpression: Expression qrc:/main.qml:236:30 depends on non-NOTIFYable properties:
+00:12 (, 0) PlatformAdapter::canRestart
+00:12 (, 0) QQmlExpression: Expression qrc:/main.qml:229:31 depends on non-NOTIFYable properties:
+00:12 (, 0) PlatformAdapter::restartHint
+00:12 (, 0) QQmlExpression: Expression qrc:/main.qml:222:30 depends on non-NOTIFYable properties:
+00:12 (, 0) PlatformAdapter::hasRestartHint
+00:12 (, 0) QQmlExpression: Expression qrc:/main.qml:215:27 depends on non-NOTIFYable properties:
+00:12 (, 0) PlatformAdapter::superuserMessage
+00:12 (, 0) QQmlExpression: Expression qrc:/main.qml:197:22 depends on non-NOTIFYable properties:
+00:12 (, 0) PlatformAdapter::isSuperuser
+00:12 (, 0) QQmlExpression: Expression qrc:/LoginForm.qml:131:21 depends on non-NOTIFYable properties:
+00:12 (, 0) ImageAdapter::defaultImageLocation
+00:13 (, 0) QQmlExpression: Expression qrc:/main.qml:61:22 depends on non-NOTIFYable properties:
+00:13 (, 0) PlatformAdapter::isSuperuser
+00:14 (qrc:/main.qml, 219) qrc:/main.qml:219:17: QML Rectangle: Binding loop detected for property "height"
+00:17 (qrc:/main.qml, 42) qrc:/main.qml:42: TypeError: Cannot read property 'identifier' of undefined
+02:17 (, 0) Refreshing drives
+02:18 (, 0) Found 0 drives
+02:18 (qrc:/main.qml, 42) qrc:/main.qml:42: TypeError: Cannot read property 'identifier' of undefined
+07:58 (, 0) Refreshing drives
+07:59 (, 0) Found 1 drives
+08:07 (, 0) Adding "boot.zip"
+08:07 (, 0) Adding "system.zip"
+08:07 (, 0) Got 2 files to download
+08:07 (, 0) Downloading "package.json"
+08:07 (, 0) Using path "C:/Users/Krishna/AppData/Local/Emteria/Installer/rpi3-v0.4.1/package.json"
+08:07 (, 0) Finished download of "package.json"
+08:07 (, 0) Downloading "boot.zip"
+08:07 (, 0) Using path "C:/Users/Krishna/AppData/Local/Emteria/Installer/rpi3-v0.4.1/boot.zip"
+08:23 (, 0) Finished download of "boot.zip"
+08:23 (, 0) Downloading "system.zip"
+08:23 (, 0) Using path "C:/Users/Krishna/AppData/Local/Emteria/Installer/rpi3-v0.4.1/system.zip"
+09:27 (, 0) Finished download of "system.zip"
+09:27 (, 0) Finished DownloadWorker
+09:27 (, 0) Flashing on raw "\\\\.\\PHYSICALDRIVE1"
+09:27 (, 0) Initializing PackageWriter
+09:27 (, 0) Package base path: "C:/Users/Krishna/AppData/Local/Emteria/Installer/rpi3-v0.4.1"
+09:27 (, 0) Drive: "SDHC Card" with 15931539456 bytes
+09:27 (, 0) Raw at "\\\\.\\PHYSICALDRIVE1"
+09:27 (, 0) Mounted at "D:"
+09:27 (, 0) PackageWriter initialized successfully
+09:27 (, 0) Starting step 0 Reading package
+09:27 (, 0) Finished step 0 Reading package
+09:27 (, 0) Starting step 1 Verifying files
+09:27 (, 0) Finished step 1 Verifying files
+09:27 (, 0) Starting step 2 Preparing
+09:58 (, 0) Diskpart output: "\r\nMicrosoft DiskPart version 10.0.15063.0\r\n\r\nCopyright (C) Microsoft Corporation.\r\nOn computer: KRISHNA-PC\r\n"
+09:58 (, 0) Diskpart error: ""
+10:00 (, 0) QProcess: Destroyed while process ("diskpart") is still running.
+10:30 (, 0) Diskpart output: "\r\nMicrosoft DiskPart version 10.0.15063.0\r\n\r\nCopyright (C) Microsoft Corporation.\r\nOn computer: KRISHNA-PC\r\n"
+10:30 (, 0) Diskpart error: ""
+10:32 (, 0) QProcess: Destroyed while process ("diskpart") is still running.
+10:32 (, 0) Finished step 2 Preparing
+10:32 (, 0) Starting step 3 Opening to write
+10:34 (, 0) Finished step 3 Opening to write
+10:34 (, 0) Assuming drive has 31116288 sectors
+10:34 (, 0) Processing 4 partitions
+10:34 (, 0) Processing partition "boot"
+10:34 (, 0) Using LBA of 2048
+10:34 (, 0) Size determined from zip source: 65011712
+10:34 (, 0) Partition will occupy 126976 sectors
+10:34 (, 0) Processing partition "system"
+10:34 (, 0) Using LBA of 129024
+10:34 (, 0) Size determined from zip source: 2147483648
+10:34 (, 0) Partition will occupy 4194304 sectors
+10:34 (, 0) Processing partition "oem"
+10:34 (, 0) Using LBA of 4323328
+10:34 (, 0) Partition has specified size of 536870912
+10:34 (, 0) Partition will occupy 1048576 sectors
+10:34 (, 0) Processing partition "userdata"
+10:34 (, 0) Using LBA of 5371904
+10:34 (, 0) Processing dynamically sized partition "userdata"
+10:34 (, 0) Partition will start at LBA 5371904
+10:34 (, 0) Remaining sectors on drive: 25744384
+10:34 (, 0) Starting step 4 Writing MBR
+10:34 (, 0) Partitions in MBR:
+10:34 (, 0) Partition 0 bootable true LBA 2048 size 126976
+10:34 (, 0) Partition 1 bootable false LBA 129024 size 4194304
+10:34 (, 0) Partition 2 bootable false LBA 4323328 size 1048576
+10:34 (, 0) Partition 3 bootable false LBA 5371904 size 25744384
+10:34 (, 0) Finished step 4 Writing MBR
+10:34 (, 0) Starting step 5 Writing file
+10:34 (, 0) Using zip file at "C:/Users/Krishna/AppData/Local/Emteria/Installer/rpi3-v0.4.1/boot.zip"
+10:34 (, 0) Failed writeRaw: 0
+10:34 (, 0) Tried to write 8388608 bytes
+10:34 (, 0) error in mz_zip_reader_extract_to_callback
+10:34 (, 0) Failed extracting zip file: write calledback failed
+10:34 (, 0) Failed unzipping file
+10:34 (, 0) Failed writing partition content for "boot"
Is it my computer?
I can confirm I am having the same issue and my log file looks the same (just I was using a 8GB cart instead of 16), ending with "Failed writing partition content for "boot""
Is the card write-protected?
I don't believe that it is, it's a 16 GB Class 10 SDHC Sandisk card.
It looks like the diskpart procedure didn't work correctly. Can you try running the installer procedure again?
Failing that, you can also try running "clean" on the drive in diskpart manually before the process.
I have the same issue with 16GB card non protected and formated...I tried also the "clean" option in diskpart and get the same error. (see log file)
+00:01 (, 0) Unable to disable rotation.
+00:01 (, 0) QQmlExpression: Expression qrc:/main.qml:260:18 depends on non-NOTIFYable properties:
+00:01 (, 0) PlatformAdapter::isDevelopmentMode
+00:01 (, 0) QQmlExpression: Expression qrc:/main.qml:236:30 depends on non-NOTIFYable properties:
+00:01 (, 0) PlatformAdapter::canRestart
+00:01 (, 0) QQmlExpression: Expression qrc:/main.qml:229:31 depends on non-NOTIFYable properties:
+00:01 (, 0) PlatformAdapter::restartHint
+00:01 (, 0) QQmlExpression: Expression qrc:/main.qml:222:30 depends on non-NOTIFYable properties:
+00:01 (, 0) PlatformAdapter::hasRestartHint
+00:01 (, 0) QQmlExpression: Expression qrc:/main.qml:215:27 depends on non-NOTIFYable properties:
+00:01 (, 0) PlatformAdapter::superuserMessage
+00:01 (, 0) QQmlExpression: Expression qrc:/main.qml:197:22 depends on non-NOTIFYable properties:
+00:01 (, 0) PlatformAdapter::isSuperuser
+00:01 (, 0) QQmlExpression: Expression qrc:/LoginForm.qml:131:21 depends on non-NOTIFYable properties:
+00:01 (, 0) ImageAdapter::defaultImageLocation
+00:01 (, 0) QQmlExpression: Expression qrc:/main.qml:61:22 depends on non-NOTIFYable properties:
+00:01 (, 0) PlatformAdapter::isSuperuser
+00:02 (qrc:/main.qml, 219) qrc:/main.qml:219:17: QML Rectangle: Binding loop detected for property "height"
+00:03 (qrc:/main.qml, 42) qrc:/main.qml:42: TypeError: Cannot read property 'identifier' of undefined
+00:13 (, 0) Refreshing drives
+00:14 (, 0) Found 1 drives
+00:20 (, 0) Adding "boot.zip"
+00:20 (, 0) Adding "oem.zip"
+00:20 (, 0) Adding "system.zip"
+00:20 (, 0) Got 3 files to download
+00:20 (, 0) Downloading "package.json"
+00:20 (, 0) Using path "C:/Users/xxxxx/AppData/Local/Emteria/Installer/rpi3-v0.4.4/package.json"
+00:20 (, 0) Finished download of "package.json"
+00:20 (, 0) Already downloaded correct "boot.zip"
+00:20 (, 0) Already downloaded correct "oem.zip"
+00:21 (, 0) Already downloaded correct "system.zip"
+00:21 (, 0) Finished DownloadWorker
+00:21 (, 0) Flashing on raw "\\\\.\\PHYSICALDRIVE1"
+00:21 (, 0) Initializing PackageWriter
+00:21 (, 0) Package base path: "C:/Users/xxxxx/AppData/Local/Emteria/Installer/rpi3-v0.4.4"
+00:21 (, 0) Drive: "JMCR SD SCSI Disk Device" with 15980298240 bytes
+00:21 (, 0) Raw at "\\\\.\\PHYSICALDRIVE1"
+00:21 (, 0) PackageWriter initialized successfully
+00:21 (, 0) Starting step 0 Reading package
+00:21 (, 0) Finished step 0 Reading package
+00:21 (, 0) Starting step 1 Verifying files
+00:23 (, 0) Finished step 1 Verifying files
+00:23 (, 0) Starting step 2 Preparing
+00:26 (, 0) Diskpart output: "\r\nMicrosoft DiskPart version 6.1.7601\r\nCopyright (C) 1999-2008 Microsoft Corporation.\r\nOn computer: MyDesktop\r\n\r\nDisk 1 is now the selected disk.\r\n\r\nDiskPart succeeded in cleaning the disk.\r\n\r\nPlease wait while DiskPart scans your configuration...\r\n\r\nDiskPart has finished scanning your configuration.\r\n"
+00:26 (, 0) Diskpart error: ""
+00:28 (, 0) Finished step 2 Preparing
+00:28 (, 0) Starting step 3 Opening to write
+00:28 (, 0) Finished step 3 Opening to write
+00:28 (, 0) Assuming drive has 31211520 sectors
+00:28 (, 0) Processing 4 partitions
+00:28 (, 0) Processing partition "boot"
+00:28 (, 0) Using LBA of 2048
+00:28 (, 0) Size determined from zip source: 65011712
+00:28 (, 0) Partition will occupy 126976 sectors
+00:28 (, 0) Processing partition "system"
+00:28 (, 0) Using LBA of 129024
+00:28 (, 0) Size determined from zip source: 2147483648
+00:28 (, 0) Partition will occupy 4194304 sectors
+00:28 (, 0) Processing partition "oem"
+00:28 (, 0) Using LBA of 4323328
+00:28 (, 0) Size determined from zip source: 67108864
+00:28 (, 0) Partition will occupy 131072 sectors
+00:28 (, 0) Processing partition "userdata"
+00:28 (, 0) Using LBA of 4454400
+00:28 (, 0) Processing dynamically sized partition "userdata"
+00:28 (, 0) Partition will start at LBA 4454400
+00:28 (, 0) Remaining sectors on drive: 26757120
+00:28 (, 0) Starting step 4 Writing MBR
+00:28 (, 0) Partitions in MBR:
+00:28 (, 0) Partition 0 bootable true LBA 2048 size 126976
+00:28 (, 0) Partition 1 bootable false LBA 129024 size 4194304
+00:28 (, 0) Partition 2 bootable false LBA 4323328 size 131072
+00:28 (, 0) Partition 3 bootable false LBA 4454400 size 26757120
+00:28 (, 0) Finished step 4 Writing MBR
+00:28 (, 0) Starting step 5 Writing file
+00:28 (, 0) Using zip file at "C:/Users/xxxxx/AppData/Local/Emteria/Installer/rpi3-v0.4.4/boot.zip"
+00:29 (, 0) Failed writeRaw: 0
+00:29 (, 0) Tried to write 8388608 bytes
+00:29 (, 0) error in mz_zip_reader_extract_to_callback
+00:29 (, 0) Failed extracting zip file: write calledback failed
+00:29 (, 0) Failed unzipping file
+00:29 (, 0) Failed writing partition content for "boot"
did someone manage to fix this problem?? I have the same issue
If possible, please try using another sdcard adapter. BTW: there is a new version of the installer available. You may want to try it too.
Hello same issue for me this week-end with the same SD card I previously installed 0.5.2 a week ago. (see my other post).
Please update your installer
I have installed the latest version of the installer today, for the first time, and very disappointingly got a similar error:
+04:34 (, 0) Using zip file at "C:/Users/cmale/AppData/Local/Emteria/Installer/rpi3-v0.5.5/system.zip"
+11:17 (, 0) Failed writeRaw: 0
+11:17 (, 0) Tried to write 8388608 bytes
+11:17 (, 0) error in mz_zip_reader_extract_to_callback
+11:17 (, 0) Failed extracting zip file: write calledback failed
+11:17 (, 0) Failed unzipping file
+11:17 (, 0) Failed writing partition content for "system"
How can I got about resolving this? or do I have to wait for another version of the installer?
Ok so I ran installation the second time and it worked. This time I didn't reformat the disk with clean. Out of frustration I just did it again and it worked.
One other thing I did which I don't think has anything to do with the success is logged onto emteria's website. Highly doubt it effected the outcome but worth mentioning.
Is it possible this issue has to do with some sort of timeout while writing?
I wanted to rewrite an older installation, but I got this error report. What should I do to get the installation done? this is a 32GB 10th grade quality appendix.
+00:01 (, 0) QQmlExpression: Expression qrc:/main.qml:260:18 depends on non-NOTIFYable properties:
+00:01 (, 0) PlatformAdapter::isDevelopmentMode
+00:01 (, 0) QQmlExpression: Expression qrc:/main.qml:236:30 depends on non-NOTIFYable properties:
+00:01 (, 0) PlatformAdapter::canRestart
+00:01 (, 0) QQmlExpression: Expression qrc:/main.qml:229:31 depends on non-NOTIFYable properties:
+00:01 (, 0) PlatformAdapter::restartHint
+00:01 (, 0) QQmlExpression: Expression qrc:/main.qml:222:30 depends on non-NOTIFYable properties:
+00:01 (, 0) PlatformAdapter::hasRestartHint
+00:01 (, 0) QQmlExpression: Expression qrc:/main.qml:215:27 depends on non-NOTIFYable properties:
+00:01 (, 0) PlatformAdapter::superuserMessage
+00:01 (, 0) QQmlExpression: Expression qrc:/main.qml:197:22 depends on non-NOTIFYable properties:
+00:01 (, 0) PlatformAdapter::isSuperuser
+00:01 (, 0) QQmlExpression: Expression qrc:/LoginForm.qml:131:21 depends on non-NOTIFYable properties:
+00:01 (, 0) ImageAdapter::defaultImageLocation
+00:01 (, 0) QQmlExpression: Expression qrc:/main.qml:61:22 depends on non-NOTIFYable properties:
+00:01 (, 0) PlatformAdapter::isSuperuser
+00:01 (qrc:/main.qml, 219) qrc:/main.qml:219:17: QML Rectangle: Binding loop detected for property "height"
+00:02 (qrc:/main.qml, 42) qrc:/main.qml:42: TypeError: Cannot read property 'identifier' of undefined
+00:13 (, 0) error: "Error transferring https://emteria.com/connect/token - server replied: Bad Request"
+00:26 (, 0) Refreshing drives
+00:27 (, 0) Found 1 drives
+00:34 (, 0) Got 0 files to download
+00:34 (, 0) Downloading "package.json"
+00:34 (, 0) Using path "C:/Users/BERCI/AppData/Local/Emteria/Installer/rpi3-v0.5.5/package.json"
+00:34 (, 0) Finished download of "package.json"
+00:34 (, 0) Finished DownloadWorker
+00:34 (, 0) Flashing on raw "\\\\.\\PHYSICALDRIVE2"
+00:34 (, 0) Initializing PackageWriter
+00:34 (, 0) Package base path: "C:/Users/BERCI/AppData/Local/Emteria/Installer/rpi3-v0.5.5"
+00:34 (, 0) Drive: "Generic Mass-Storage USB Device" with 31914983424 bytes
+00:34 (, 0) Raw at "\\\\.\\PHYSICALDRIVE2"
+00:34 (, 0) PackageWriter initialized successfully
+00:34 (, 0) Starting step 0 Reading package
+00:34 (, 0) Finished step 0 Reading package
+00:34 (, 0) Starting step 1 Verifying files
+00:34 (, 0) "boot.zip" failed MD5 verification
+00:34 (, 0) Expected "2a1f06370aec47dc569967343fcf90f1" computed "invalid path"
@obero, update your installer.
After the update, this was the result.
Failed writing partition image
Failed writing from image boot.zip
+00:10 (qrc:/main.qml, 221) qrc:/main.qml:221:17: QML Rectangle: Binding loop detected for property "height"
+00:29 (, 0) Refreshing drives
+00:30 (, 0) Found 1 drives
+13:22 (, 0) Downloading "package.json"
+13:22 (, 0) Using path "C:/Users/BERCI/AppData/Local/Emteria/Installer/rpi3-v0.5.6/package.json"
+13:22 (, 0) Finished download of "package.json"
+13:22 (, 0) Checking for OEM config..
+13:22 (, 0) Retrieved OEM config len = 0
+13:22 (, 0) Downloading "boot.zip"
+13:22 (, 0) Using path "C:/Users/BERCI/AppData/Local/Emteria/Installer/rpi3-v0.5.6/boot.zip"
+13:25 (, 0) Finished download of "boot.zip"
+13:25 (, 0) Downloading "oem.zip"
+13:25 (, 0) Using path "C:/Users/BERCI/AppData/Local/Emteria/Installer/rpi3-v0.5.6/oem.zip"
+13:25 (, 0) Finished download of "oem.zip"
+13:25 (, 0) Downloading "system.zip"
+13:25 (, 0) Using path "C:/Users/BERCI/AppData/Local/Emteria/Installer/rpi3-v0.5.6/system.zip"
+13:52 (, 0) Finished download of "system.zip"
+13:52 (, 0) Finished DownloadWorker
+13:52 (, 0) Flashing on raw "\\\\.\\PHYSICALDRIVE2"
+13:52 (, 0) Initializing PackageWriter
+13:52 (, 0) Package base path: "C:/Users/BERCI/AppData/Local/Emteria/Installer/rpi3-v0.5.6"
+13:52 (, 0) Drive: "SDHC Card" with 31914983424 bytes
+13:52 (, 0) Raw at "\\\\.\\PHYSICALDRIVE2"
+13:52 (, 0) PackageWriter initialized successfully
+13:52 (, 0) Starting step 0 Reading package
+13:52 (, 0) Finished step 0 Reading package
+13:52 (, 0) Starting step 1 Verifying files
+13:52 (, 0) Skipping "ota.zip" as it isn't required for flashing
+13:53 (, 0) Finished step 1 Verifying files
+13:53 (, 0) Starting step 2 Preparing
+14:13 (, 0) Diskpart output: "\r\nMicrosoft DiskPart version 10.0.16299.15\r\n\r\nCopyright (C) Microsoft Corporation.\r\nOn computer: DESKTOP-V9PMQDU\r\n\r\nDisk 2 is now the selected disk.\r\n\r\nDiskPart succeeded in cleaning the disk.\r\n\r\nPlease wait while DiskPart scans your configuration...\r\n\r\nDiskPart has finished scanning your configuration.\r\n"
+14:13 (, 0) Diskpart error: ""
+14:15 (, 0) Finished step 2 Preparing
+14:15 (, 0) Starting step 3 Opening to write
+14:15 (, 0) Finished step 3 Opening to write
+14:15 (, 0) Assuming drive has 62333952 sectors
+14:15 (, 0) Processing 4 partitions
+14:15 (, 0) Processing partition "boot"
+14:15 (, 0) Using LBA of 2048
+14:15 (, 0) Size determined from zip source: 65011712
+14:15 (, 0) Partition will occupy 126976 sectors
+14:15 (, 0) Processing partition "system"
+14:15 (, 0) Using LBA of 129024
+14:15 (, 0) Size determined from zip source: 2147483648
+14:15 (, 0) Partition will occupy 4194304 sectors
+14:15 (, 0) Processing partition "oem"
+14:15 (, 0) Using LBA of 4323328
+14:15 (, 0) Size determined from zip source: 536870912
+14:15 (, 0) Partition will occupy 1048576 sectors
+14:15 (, 0) Processing partition "userdata"
+14:15 (, 0) Using LBA of 5371904
+14:15 (, 0) Processing dynamically sized partition "userdata"
+14:15 (, 0) Partition will start at LBA 5371904
+14:15 (, 0) Remaining sectors on drive: 56962048
+14:15 (, 0) Starting step 4 Writing MBR
+14:15 (, 0) Partitions in MBR:
+14:15 (, 0) Partition 0 bootable true LBA 2048 size 126976
+14:15 (, 0) Partition 1 bootable false LBA 129024 size 4194304
+14:15 (, 0) Partition 2 bootable false LBA 4323328 size 1048576
+14:15 (, 0) Partition 3 bootable false LBA 5371904 size 56962048
+14:15 (, 0) Finished step 4 Writing MBR
+14:15 (, 0) Starting step 5 Writing file
+14:15 (, 0) Using zip file at "C:/Users/BERCI/AppData/Local/Emteria/Installer/rpi3-v0.5.6/boot.zip"
+14:15 (, 0) Failed writeRaw: 0
+14:15 (, 0) Tried to write 8388608 bytes
+14:15 (, 0) error in mz_zip_reader_extract_to_callback
+14:15 (, 0) Failed extracting zip file: write calledback failed
+14:15 (, 0) Failed unzipping file
+14:15 (, 0) Failed writing partition content for "boot"
I had the same problem, changed the adapter (microSD-to-SD slot) then it worked!
Thanks for reporting, @mozy!